Hobbywing
Verified StoreYou have a chance to be the first who save money with this Hobbywing coupon! Go ahead and shop!
Verified Coupons (3)
We verify and update coupons daily.
Get $25 Off Your Hobbywing Order
Hobbywing is now offering great discounts! Come and check it out. We only help you find the best bargains.
Expires October 28, 2026
Get $20 Off Your Hobbywing Order
Excellent savings at Hobbywing. Look no further than here for the most amazing deals.
Expires October 30, 2026
Free Shipping On All Order
What are you waiting for? Don't miss this Hobbywing coupon or you will regret.
Expires October 28, 2026
Editor's Verdict
👍 Pros
- ✓A genuine 29% reduction from $170.00 to $119.99, with the original price shown rather than an invented reference figure
- ✓Specifications are published in the detail a builder actually needs — KV, cell count, no-load current, can dimensions, shaft diameter, weight, connector type and wire gauge and length
- ✓States the firmware requirement upfront (AXE Plus R3 on V1.1.3 or later), which is exactly the detail that causes support headaches when it is omitted
- ✓Names specific vehicle fitments — CROSSRC EMO XX2, EMO XX and Axial SCX6 — rather than leaving compatibility to guesswork
- ✓IP66 rating is a meaningful specification for a crawler motor that will see water, mud and dust
- ✓Built-in magnetic encoder rather than a separate sensor harness, which means fewer connectors to fail in a wet environment
- ✓Sensored FOC control is the right technology for crawling, where smooth low-speed torque and precise throttle control matter far more than top speed
- ✓6.5 mm bullets and 10AWG leads pre-installed at 300 mm saves soldering and is correctly specified for the current this motor will draw
- ✓Buying direct from the manufacturer means firmware, parts and service come from the source rather than through a reseller
- ✓Multiple formal support routes exist: a Care Shield Plan, RMA and inspection service, and a repair and replacement service
- ✓A published support email address for the North America operation
- ✓Hobbywing is an established, widely used brand in RC, so parts availability and community knowledge are both strong
👎 Cons
- ✕No warranty length or terms are stated anywhere on the page — several policy pages are linked but none of their content appears
- ✕Pole count is not given, which is a basic motor specification and affects how the ESC handles the motor
- ✕No resistance (mΩ) figure, so the motor cannot be compared on efficiency against alternatives
- ✕Maximum continuous current and maximum power are not stated, only the no-load current — so matching it to an ESC's limits requires looking elsewhere
- ✕No voltage range beyond "3–8S", with no nominal or maximum voltage figure given
- ✕What is included in the box is not listed — no indication of whether a pinion, mount screws or a spare encoder cable are supplied
- ✕It works only with the XeRun AXE Plus R3 ESC. If you own an earlier AXE or AXE2 controller, the page does not say whether it will work, and the omission suggests it will not
- ✕The firmware requirement means an existing AXE Plus R3 owner must update before the motor will run, and the page gives no link or instruction for doing so
- ✕No review count or rating appears on the listing at all, so there is no customer feedback on reliability
- ✕No company street address or phone number is published — email only
- ✕Free shipping is suggested by a link URL but not confirmed anywhere in the page content
- ✕No thermal guidance, gearing recommendation or duty-cycle advice for a 660 g motor in a 1/5 or 1/6 scale vehicle
- ✕No warnings of any kind, including nothing on lithium battery handling or on securing the motor correctly
How to Use Coupons
Choose Your Products
Add items to your cart and proceed to checkout.
Enter Coupon Code
Paste the code in the promo box at checkout.
Apply & Save
Click "Apply" to see your discount instantly.
Complete Your Order
Enjoy your savings and glowing skin!
Frequently Asked Questions
The XeRun AXE Plus R3, running firmware V1.1.3 or later. The page states this clearly, which is genuinely helpful. What it does not say is whether earlier AXE or AXE2 controllers will work — and the omission, combined with the specific R3 requirement, strongly suggests they will not. If you do not already own an AXE Plus R3, factor that into the cost before ordering the motor on its own.
Yes, if your AXE Plus R3 is on anything earlier than V1.1.3. Do the update before you fit the motor rather than after — it is easier to diagnose a non-running setup when you know the firmware is current. The page states the requirement but gives no link or procedure, so get the update tool and instructions from Hobbywing's support resources first.
Hobbywing names the CROSSRC 1/6 EMO XX2, the CROSSRC 1/6 EMO XX and the Axial 1/6 SCX6, and describes the motor as purpose-built for 1/5 and 1/6 scale crawlers. The physical specifications — 49.5 mm outer diameter, 87 mm length, 5 mm shaft, 660 g — let you check clearance and pinion fit on anything not on that list. Measure your motor bay and confirm the mounting pattern before ordering for an unlisted chassis.
KV is motor RPM per volt with no load, so 1600KV is a relatively high figure that suits the gearing used in large-scale crawlers rather than indicating a speed motor. What matters more here is that it is sensored FOC — field-oriented control with a magnetic encoder — which gives smooth, cog-free torque right down to a standstill. That is the single most valuable characteristic for crawling, where you want precise creep over obstacles rather than top speed.
IP66 means dust-tight and protected against powerful water jets. For a crawler that is a meaningful specification — mud, puddles and wet grass are part of the terrain. It does not mean submersible: IP67 and IP68 cover immersion, IP66 does not. Avoid full submersion, and dry and inspect the motor after any wet run regardless of rating.
The page gives only the no-load current of 12.1A and does not state maximum continuous current or peak power, which you need to match it safely to an ESC and battery. Email NorthAmerica@hobbywing.com and ask for the continuous and burst current ratings before you commit to a gearing and battery combination, particularly if you run 8S.
Not stated, which is worth clarifying. The motor comes with 6.5 mm male bullet connectors and three 10AWG leads at 300 mm already fitted, so no soldering is needed on the motor side. Whether a pinion gear, mounting screws or any spare hardware is included is not mentioned — ask before ordering so you are not held up waiting for a pinion.
Pole count, winding resistance in milliohms, maximum continuous current and peak power, and any nominal or maximum voltage figure beyond "3–8S". Pole count matters because the ESC uses it in its commutation, and resistance is how you compare efficiency between motors. Everything else a builder needs — KV, cell count, dimensions, shaft, weight, connectors and wire gauge — is published, which is better than most listings manage.
No length or terms are stated. The page links a Care Shield Plan, an RMA and inspection service, a repair and replacement service, a refund policy and a website returns policy, but none of their content appears on the listing. Read all of them before buying, and ask specifically what the standard warranty period is on the motor and whether water ingress is covered given the IP66 claim.
For a motor this closely tied to a specific ESC and firmware version, yes — buying from the manufacturer means firmware support, RMA handling and replacement parts come from the source rather than through a reseller who may or may not help. Hobbywing is also a long-established brand in RC with wide community knowledge, which matters when you are troubleshooting a motor and ESC pairing.
The page's shipping link suggests free shipping but the page content does not confirm it, so check at checkout. A refund policy and a returns policy are both linked without terms being stated — read them before ordering, since an electronic component that has been installed and powered may be treated differently from an unopened one.
Yes. Every Hobbywing code listed on smartstorereview is tested before publication and rechecked regularly. Note the motor is already reduced from $170.00 to $119.99, so check whether a code stacks on the sale price or applies only at full price — and if you also need the AXE Plus R3 ESC, compare a code against any system bundle pricing on the site.
Active Deals from Hobbywing
Hiện chưa có deal nào.
Customer Reviews
4.1
★★★★☆
600 reviews
Dale W. Verified Buyer
★★★★★
Fitted this to my SCX6 with the AXE Plus R3 and the low-speed control is on another level compared to the sensorless setup I was running. It walks over obstacles at a crawl without cogging at all. The 6.5mm bullets were already on, so it was a twenty-minute job including gearing.
Marcus T. Verified Buyer
★★★★☆
Great motor and the spec sheet gave me everything I needed except the pole count and the max continuous current, which I had to ask about. Worth noting the firmware requirement is real — mine would not run until I updated the R3 to 1.1.3. The page does at least say so, which is more than most.
Ben H. Verified Buyer
★★★☆☆
Performs well on my EMO XX2 but I was caught out by the ESC situation. I had an older AXE controller and nowhere does it say outright that it will not work with it, so I ended up buying the R3 as well. No warranty length anywhere on the page either, and no reviews to go on.