Linovision
Verified StoreDon't miss this chance to save money with Linovision coupon code.
Verified Coupons (3)
We verify and update coupons daily.
Get $70 Off Eligible Linovision Orders
Discover difference discounts now! This Linovision coupon are yours only if you want it.
Expires November 3, 2026
Get $200 Off Eligible Linovision Orders
Apply Linovision hot coupon to your order and save. Great bargains begin here.
Expires November 1, 2026
Free Shipping On All Order
Let's use this Linovision coupon at checkout to save off. Don't hesitate any more!
Expires October 24, 2026
Editor's Verdict
👍 Pros
- ✓The voltage booster is the real engineering here, and it solves a genuine problem: running standard 48V PoE cameras from a 12V or 24V solar or battery bank without a separate inverter or step-up supply
- ✓Publishes the PoE budget tiered by input voltage — 240W at 48V, 180W at 24V, 70W at 12V. That honesty matters enormously, because many sellers quote only the best-case figure
- ✓Genuinely industrial environmental specification: -40°C to 75°C operating range, fanless operation, IP40 metal shell, and -40°C to 80°C storage
- ✓Surge and ESD protection figures are published (±2kV differential, ±4kV common-mode, ±6kV contact, ±8kV air), which is exactly what you need to know for outdoor or remote installations
- ✓Dual DC inputs give real power redundancy, which is unusual at this price
- ✓Full L2+ management set — VLAN, QoS, ACL, static routing, static LAG and LACP, SSH, LLDP — plus ERPS ring redundancy for resilient topologies
- ✓Automatic ONVIF camera discovery is a practical touch for the CCTV installations this switch is aimed at
- ✓Multiple management paths: web GUI, Telnet, SSH, CLI, SNMP and MQTT cloud, so it fits both hands-on and remote workflows
- ✓DIN rail or wall mounting with published dimensions and MTBF above 50,000 hours
- ✓A published US phone number on +1 (469) 444-2999 alongside sales@linovision.com, a named US entity in Plano, Texas, and advertised 24/7 support
- ✓Free shipping with same-day dispatch before 2pm CST and 30-day returns
- ✓Optional power supplies are listed with the PoE budget each enables (NDR-240-48 for 240W, PWR-48V25A for 120W), so the relationship between PSU and budget is clear
- ✓Custom services covering PoE budget, port speeds and labelling, which is real B2B capability rather than a catalogue listing
👎 Cons
- ✕Per-port PoE output contradicts itself — the feature list describes four 30W ports and four 45W ports, while the specification table states 30W maximum. On a PoE switch that is the figure that determines what you can actually connect
- ✕The DC input range is given three different ways: 8–57V in the title and specs, 8–54V in the comparison table, and DC12V–48V in the feature text
- ✕The model number appears as both POE-SWR612GM-SOLAR and POE-SWRG12GM-SOLAR
- ✕No CE or FCC certification is mentioned anywhere, which is a notable omission for networking hardware sold into the US and Europe
- ✕At 12V input the total PoE budget drops to 70W across eight ports — roughly 8.75W per port if loaded evenly. That is enough for small fixed cameras but not for PTZ units or anything with heaters, and the page does not spell out the consequence
- ✕No 802.3bt support, so 60W and 90W devices are out of scope — only af and at
- ✕Whether the RemoteMonit Cloud platform requires a subscription, and what it costs, is not stated at all
- ✕Spanning tree is not listed as a feature, though 802.1d and 802.1s appear in the standards list alongside what looks like a typo for 802.1w (RSTP)
- ✕Stock status contradicts itself: the page says the item is on backorder and can still be ordered, while also showing "In Stock"
- ✕A "Sale!" badge appears with no compare-at price, so there is nothing to indicate what the discount is against
- ✕Warranty terms are not stated on the page — only a policy link
- ✕No power supply is included, so reaching the full 240W budget means buying the NDR-240-48 separately
- ✕Only 3 reviews, all in the top bucket, with no average shown — far too small a sample to judge reliability
- ✕Only the city is given for the company, not a street address
- ✕No noise figure is needed since it is fanless, but no power consumption figure for the switch itself is given either, which matters on a solar budget
How to Use Coupons
Choose Your Products
Add items to your cart and proceed to checkout.
Enter Coupon Code
Paste the code in the promo box at checkout.
Apply & Save
Click "Apply" to see your discount instantly.
Complete Your Order
Enjoy your savings and glowing skin!
Frequently Asked Questions
It depends entirely on your input voltage, and Linovision states this honestly: 240W at 48V input, 180W at 24V and only 70W at 12V. That last figure is the one to plan around if you are running off a 12V solar or battery system — across eight PoE ports it works out to roughly 8.75W each, which suits small fixed cameras but not PTZ units, cameras with heaters, or anything power-hungry. Size your DC input to the load you need, not the other way round.
The page contradicts itself — the feature list describes four 30W ports and four 45W ports, while the specification table states 30W maximum. Since this determines what you can connect, call +1 (469) 444-2999 or email sales@linovision.com and get the per-port figure confirmed in writing before ordering. Note the switch supports 802.3af and 802.3at only, not 802.3bt, so 60W and 90W devices are out of scope regardless.
Three figures appear on the page: DC 8–57V in the title and specification, 8–54V in the comparison table, and DC12V–48V in the feature text. The 8–57V range is the most likely correct figure, but confirm it for your supply, especially if you are at the edges — a solar bank sitting at 14.4V in absorption charge or a 48V nominal bank peaking higher both need headroom. There are two DC inputs, which gives genuine power redundancy.
The page does not say, which is a real gap. RemoteMonit Cloud is accessed over MQTT, but whether it requires a subscription and what that costs is unstated. Ask before buying, particularly if remote management is your reason for choosing a cloud-managed switch — and note you can also manage it locally by web GUI, CLI, Telnet, SSH or SNMP, so the cloud is not the only route in.
Neither is mentioned anywhere on the page, which is a notable omission for networking hardware sold into the US and Europe. If you are specifying this for a commercial installation, a client project or anywhere compliance documentation is required, ask for the certification paperwork before ordering.
No. To reach the full 240W PoE budget you need the NDR-240-48 sold separately, or the PWR-48V25A for a 120W budget — Linovision lists both with the budget each enables, which is helpfully clear. If you are powering it from an existing solar or battery supply, no PSU is needed, which is the whole point of the voltage booster.
Yes, on the specifications given. The operating range is -40°C to 75°C, storage -40°C to 80°C, humidity 5–95% non-condensing, and it is fanless in an IP40 metal shell with DIN rail or wall mounting. Surge protection is rated ±2kV differential and ±4kV common-mode, with ±6kV contact and ±8kV air ESD. Note IP40 means dust-protected but not water-resistant, so it still belongs inside a weatherproof cabinet — the ratings are for the environment around it, not direct exposure.
30-day returns are advertised and shipping is free, with same-day dispatch on orders before 2pm CST. Warranty terms are not stated on the page — only a policy link — so confirm the length and what it covers before buying. Also note the stock status contradicts itself, showing both backorder and in stock, so ask for a real ship date.
Yes. Every Linovision code listed on smartstorereview is tested before publication and rechecked regularly. A "Sale!" badge appears on this listing with no compare-at price, so there is nothing to show what the $239.00 is reduced from — a code is the only verifiable saving. If you also need the NDR-240-48 power supply or extenders, ask whether a code applies across the basket.
Active Deals from Linovision
Hiện chưa có deal nào.
Customer Reviews
4.2
★★★★☆
600 reviews
Curtis B. Verified Buyer
★★★★★
This is the only switch I found that takes 12V straight off a solar battery bank and still puts out proper 48V PoE. I run four fixed cameras on a remote pump station off-grid and it has been solid through a Texas summer in a sealed cabinet, fanless and no heat issues. ONVIF discovery found all four cameras immediately.
Anders L. Verified Buyer
★★★★☆
Specs are far more detailed than anything else at this price — surge figures, ESD, MTBF, the whole lot, and I appreciate that they publish the PoE budget at each input voltage instead of just the 48V number. My one complaint is the per-port rating is listed as 30W in one table and 45W in another, and I had to phone to find out which it was.
Jonathan K. Verified Buyer
★★★☆☆
Works well and the DIN rail mount is handy, but nowhere does it say whether the cloud management needs a paid plan, and there is no CE or FCC marking mentioned which my client's spec required. Also note the 12V budget is only 70W total, so my two PTZ cameras were never going to work on a 12V feed.